Colour & tone
Vribond Wood Stain
A penetrating stain that delivers even, rich colour on solid timber and veneer — ready for a clear topcoat.
Technical properties
Specifications
Indicative values – confirm against the product label / TDS for your batch.
Type
Penetrating wood stain
Finish
Matte, natural grain visible
Shades
Teak, walnut, rosewood, mahogany, ebony
Drying time
4–6 hrs before recoat
Coverage
~8–12 m² per litre
Application
Brush, cloth or spray
Recoat
2 coats for deeper tone
Clean-up
As per base (water / solvent)
Packaging
Available sizes
– 200 ml bottle
– 500 ml can
– 1 litre can
– 5 litre can
– 20 litre drum
Standards & performance
What it delivers
01
Even penetration, low blotching
02
Grain-enhancing formulation
03
Topcoat compatible
How to use
Three simple steps
1
Clean and lightly sand bare wood
2
Apply evenly along the grain
3
Wipe off excess, let dry, then topcoat
Storage & handling
Keep it at its best
Store upright in a cool, dry, well-ventilated place away from heat and flame.
Keep container closed when not in use. Shelf life ~24 months unopened.
Safety information
Handle with care
Use in a ventilated area. Avoid skin/eye contact; wear gloves. Keep away from open flame.
Documentation
Technical Data & Safety Data Sheets
Full TDS and SDS for this product are available to specifiers and trade buyers on request.
Need a sample or a quote?
Tell us your volumes and application – we will help you specify the right grade.